Lumen Prize Entry

On impulse I sent a last minute entry to the Lumen Prize 2016. See lumenprize.com. This will also be my first year MA exhibition piece this July.

Screen Shot 2016-05-29 at 15.04.00

   Sample Touch Narrative (extract)

METAMORPHOSIS: Artists Terence Quinn & Vanessa Abreu (life model)

Look, Touch and Listen and you will be entranced by the humanity in this digitally created touch narrative physical artwork.

The underlying concept of ‘Metamorphosis’ is ‘Giving the Model a Voice’, an artwork of a life model that is substantially influenced by the artist’s muse as well as the artist, and includes the model Vanessa’s narrative in her own voice. This is in stark contrast to the usually silent life model setting and resultant work. Vanessa is a Laban MA trained contemporary dancer and choreographer, who started life modelling after she damaged her knee. She now models for the Royal Academy (the Royal Drawing School). The work tells Vanessa’s story in two linked contrasting sculptures that play her narrative when either is physically touched. The ‘concept of the gaze’ is thus confronted by the viewer interacting with the work, which humanises Vanessa’s nude images resulting in her quiet and emotionally evocative voice dominating the viewer’s attention rather than the visual. Their focus is now listening to her story unfold – “I started modelling because I was stressed”. The technology used is invisible to the audience as it is hidden within the sculptures which will be mounted on two transparent plinths set side by side.

The very latest digital methods (accessible to a UAL first year Fine Art Digital MA student) were used to make a full body 3D scan of Vanessa in a nude dance pose in traditional (Rodin) style and then 3D printed to make a 75cm tall plaster sculpture. The 3D print also became the starting point for the contrasting 5000 year old lost wax casting process, to make a very different hollow bronze bust of Vanessa as though she was an ancient industrial artifact recovered from the sea – representing her ‘distress’ and ‘stress’ over the period when her career suddenly changed through force of circumstance.

MAKING PROCESS

3D Scan (part)  VanessaScan

Tidying up and Re-topologising the scan to 1M Polygons using ZBrush – Thank you to my friend Nick for the much needed assistance with ZBrush

IMG_3331 2

3D Print preparation – Thank you to Bill Nicholson at CSM for your much needed assistance with a tool that only £8000 can buy!

Screen Shot 2016-05-29 at 15.21.46

3D Print (Sintering) in four parts – Thanks Bill Nicholson at CSM for letting me use your Digital Fabrication Department’s facilities

Assembled3DPrintVanessa

Mold made from 3D printed bust – Thanks Becky for all your help in the Plaster Room and the Foundry at Camberwell

IMG_2861

Resultant Hollow Wax Model

FullSizeRender 24

Wax model shortly before making mold for Bronze casting

Bronze in Process

Into the furnace to make the mold for the Bronze Sculpture using the lost wax method (the wax model will be no more – leaving a void in its place into which the Bronze will be poured) – Thank you Becky

BronzeFoundry

After Pouring the Bronze into the Mold

IMG_3285

A Sculpture Student breaking his Bronze out of the mold (as I was at the same time)

IMG_3297

Cleaning up the freed Bronze casting – cutting off runners (used to channel the molten bronze into the mold) and riders (used to release the air when the bronze is poured)

IMG_3301

An Undignified End  –  After Jet HosingIMG_3306

Making Voice Recordings  Narrative Recording 1

Editing the Narratives in Audacity (thank you Ed for the group lesson)

Screen Shot 2016-05-30 at 16.10.05

Programming the Bare Conductive Arduino Touch Board  – Thanks CCW Digital for Collaborative Education and in particular Grzesiek Sedek at UAL Wimbledon for your patience and advice

Screen Shot 2016-05-30 at 16.14.34

The Touch Board and attachments hidden in the Sculptures  – Thank you Grace Atlee MA Illustration for introducing me to BareConductive which gave me the idea in the first place

IMG_3329

Clear Transparent Acrylic Plinths – Thanks Jake Biernat for the presentation which showed his work displayed in the same way – obviously I liked it

IMG_3330

The End Result  Screen Shot 2016-05-29 at 15.04.00

HARDWARE & SOFTWARE USED

Occipital Structure Sensor attached to a mini iPad with retina Display with the cloud based App ItSeez3D

ZBrush to tidy up the 3D scan to increase the 3D image quality (re-topologise) from 200,000 to 1 Million polygons

3D Laser Sintering to 3D print the full body sculpture in 4 pieces which were then glued together and hand finished (because of part shrinkage during the printing process)

Lost wax casting to make the bronze sculpture from the 3D printed bust. The bronze alloy used was first tested to ensure that it was sufficiently electrically conductive.

H1 Zoom recorder to make two hours of recordings in WAV format on a micro SD card

Audacity software on MacBook Pro to edit the recordings to short narratives and convert to MP3 on micro SD cards for the Touch Booard below

BareConductive Touch Board (a derivative of the Arduino Leonardo) to provide the proximity sensing (without external sensors to the sculptures), Bluetooth capability to transmit the recordings wirelessly, with rechargeable Lipo battery and an overall size that would fit within the sculptures

Conductive paint brushed inside the 3D printed sculpture

Arduino Sketches adapted from Open Source options to increase the proximity sensitivy so that random narratives would be triggered by touching the external surface of the 3D printed sculpture (rather than the conductive paint itself which is inside an over 3mm thick non conductive plaster sculpture)

Two transparent acrylic plinths to confound the viewer as to how the artwork operates technically

 

 

 

One thought on “Lumen Prize Entry

  1. Pingback: Unit 1 Assessment | terencemquinn91

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

w

Connecting to %s